Three-in-one feeder automatic feeding accuracy, material rack device, stamping and leveling feeding
http://www.ruihui.net
The three-in-one feeder should have high degree of automation, leveling, good feeding precision, high synchronization performance and easy operation.
The advantages of greatly saving labor costs and floor space have won the favor of more and more stamping customers, and are considered to be the most advanced automatic feeding device in the industry.
With the increase in demand, there are more and more manufacturers engaged in the production of three-in-one feeders, but the quality that comes with them has also been mixed, especially in design and production. problem.
Ruihui talks about the reason why the three-in-one feeder feeds the run:
1. The rollers are not in the same heart. In the leveling or feeding part, one side is sewn and the other side is sewn to lead out. If the three-in-one roller is not the same, it is a big problem. It is a problem with the feeder.
2. The pressing device is different in tension, the adjusting material wheel is not adjusted correctly, and the width of the adjusting guide wheel in the feeding part of the feeding is not adjusted to a suitable size, and the width of the discharging wheel is not adjusted to an appropriate size.
If the three-in-one feeder unwinding part of the material blocking device, the feeding wheel of the flat feeding part, and the feeding wheel of the feeding and discharging are not adjusted well, if it is too wide, it will easily go wrong.
3. the positioning of the mold tip is not done, it is very likely that the positioning of the mold.
4. There is a problem with the material guiding device of the material frame, and the design is unreasonable. The irrationality of this design can easily lead to accidents. This means that the guiding device is not doing well. The design is not reasonable.
Specification:
| Model | MAC2-400 | MAC2-500 | MAC2-600 | MAC2-800 |
| Stock Width(mm) | 50-400 | 50-500 | 50-600 | 50-800 |
| Stock Thickness(mm) | 0.3~3.2 | 0.3-3.2 | 0.3-3.2 | -3.2 |
| Max.Coil Weight(kg) | 3000 | 3000 | 3000 | 5000 | 5000 | 7000 |
| Max.Coil O.D.(mm) | 1200 | 1200 | 1200 | |
| Coil I.D.(mm) | 8 | 8 | 508 | 508 |
| Feed Length(mm) | ~500* | ~500* | ~500* | ~500* |
| Max. Line Speed(m/min) | 16-24 | 16-24 | 16-24 | 16-24 |
| Work Roll Number(pieces) | upper 6
lower 5 | upper 6
lower 5 | upper 6
lower 5 | upper 6
lower 5 |
| Feed Roll Number(set) | 1 | 1 | 1 | 1 |
| Main Motor(kw) | AC2.9 | AC2.9 | AC4.4 | AC4.4 |
| Mandrel Expansion | hydraulic | hydraulic | hydraulic | hydraulic |
| Reel Motor(kw) | 1.5 | 1.5 | 1.5 | 2.2 | 2.2 | 3.7 |
| Power(V) | 3 Phase 220V/380V/50HZ |
| Operating Air(Mpa) | 0.49 | 0.49 | 0.49 | 0.49 |
Straigtening performance:
| tock Thicknees (mm) | Stock Width (mm) |
| 0.3 | 400 | 500 | 600 | 800 |
| 0.4 |
| 0.6 |
| 0.8 |
| 1.0 |
| 1.2 |
| 1.4 |
| 1.6 | 470 | 470 |
| 1.8 | 400 | 400 |
| 2.0 | 360 | 360 |
| 2.3 | 300 | 300 | 300 | 300 |
| 2.5 | 230 | 230 | 230 | 230 |
| 2.8 | 150 | 150 | 150 | 150 |
| 3.2 | 110 | 110 | 110 | 110 |
*1:(Pneumatic):Option in case of pneumatic mandrel expansion is provi
1. Pre-Sales Service:We have professional designers to meet the different requirement of our customers.
2. After-Sales service:We have an efficient team to meet 24*7 all day service.
3. Full-Service:Actively cooperate with customers to deal with problems in equipment using.
4. Engineers can provide service machinery overseas.
Product Tags:
|
|
Three - In - One Stamping And NC Leveller Feeder Hydrauilc Mandrel Expansion Images
|
