Automatic 3 In 1 Feeder Flattening Stamping Equipment CE And ISO Certification
Adjustment of the leveling roller of the three-in-one feeder
In the actual stamping automation production process, the hardness, bending degree and other various conditions are different due to the thickness, width and material of the material used, so it is necessary to adjust the leveling amount every time.
Two handwheels are placed on the three-in-one feeder leveling wheel to adjust the leveling wheel up and down.
Three-in-one feeder leveling adjustment method:
1. Slowly turn the leveling handwheel so that the gap between the working wheels and the thickness of the material.
2. Use the jog button to send the material out once and then confirm that it is leveled.
3. When the leveling has not been completed, the handwheel will be leveled, and the rotation will be increased by half a turn each time to increase the leveling.
4. The amount of the flattening wheel on the inlet side is adjusted more, and the reduction of the flattening wheel on the outlet side is adjusted to be smaller. The standard for the amount of reduction is 20-40% of the thickness of the material on the inlet side and 0-10% of the thickness of the material on the outlet side.
5. Especially for a certain degree of bending material to make it reverse bending, it is necessary to adjust the leveling amount on the outlet side, which is effective.
Pay special attention to the leveling adjustment:
The three-in-one feeder has its own range of thickness, the standard type is 0.3-2.2mm, the middle plate type is 0.5-4.5mm, and the thick plate type is 0.6-6.0mm.
When the leveling is too large, the traces of the wheel will be on the material, or the edges of both sides will be wavy. Also, if the abnormal pressure is pressed, the flat wheel bearing shaft will be damaged, or the load on the drive unit will increase, so be careful.
2.Specification
| Specification |
| Model | MAC4-400 | MAC4-600 | MAC4-800 | MAC4-1000 | MAC4-1300 |
| Stock Width(mm) | 70~400 | 70~600 | 70~800 | 70~1000 | 70~1300 |
| Stock Thickness(mm) | 0.6~6.0 | 0.6~6.0 | 0.6~6.0 | 0.6~6.0 | 0.6~6.0 |
| Max.Coil Weight(kg) | 5000 | 5000 | 7000 | 7000 | 7000 |
| Max.Coil O.D.(mm) | 1400 | 1400 | 1400 | 1400 | 1400 |
| Coil I.D.(mm) | 508 | 508 | 508 | 508 | 508 |
| Feed Length(mm) | ~500* | ~500* | ~500* | ~500* | ~500* |
| Max.Line Speed(m/min) | 16~24 | 16~24 | 16~24 | 16~24 | 16~24 |
| Work Roll Number(piece) | upper 4 | upper 4 | upper 4 | upper 4 | upper 4 |
| down 3 | down 3 | down 3 | down 3 | down 3 |
| Feed Roll number(set) | 1 | 1 | 1 | 1 | 1 |
| Main Motor | AC5.5 | AC7.5 | AC7.5 | AC11.0 | AC11.0 |
| Mandrel Expansion | Hydrauilc | Hydrauilc | Hydrauilc | Hydrauilc | Hydrauilc |
| Reel Motor(kw) | 2.2 | 2.2 | 3.7 | 3.7 | 3.7 |
| Power(v) | 3 Phase 220V/380V/50HZ |
| Operating Air(Mpa) | 0.49 | 0.49 | 0.49 | 0.49 | 0.49 |
| Straightening Performance |
| Model | MAC4-400 | MAC4-600 | MAC4-800 | MAC4-1000 | MAC4-1300 |
| Stock Thickness (mm) | 0.6~1.3 | 400 | 600 | 800 | 1000 | 1300 |
| 2.0 |
| 2.3 |
| 2.5 | 1170 |
| 2.8 | 933 | 933 |
| 3.2 | 714 | 714 | 714 |
| 4.0 | 457 | 457 | 457 | 457 |
| 4.5 | 361 | 361 | 361 | 361 | 361 |
| 5.0 | 293 | 293 | 293 | 293 | 293 |
| 6.0 | 203 | 203 | 203 | 203 | 203
|
FAQ:
Q1:What kinds of machines do you have?
Our main products are:Nc Servo Roll Feeder,Uncoiler, Straightener, 3 in1 Straightener
Feeder,Transfer systems,Press Feeding Line., etc
Q2:Is your equipment standard or customized?
Both, we can OEM & ODM with customers.
Q3:What are your equipments certification?
All our items are coming with CE certifications.
Q4:How did your company's quality system work?
“QUALITY IS OUR CULTURE” Our quality is not the best in the world, and the price is not the
cheapest. But we can provide you excellent products to defeat your competitors.
Q5:How long is the warranty period of the machine?
We offer free service with a warranty period of one year, If it is operate in reasonable, the
machine can be used more than 10 years.
Q6: Is it possible to be a foreign agent and distributor?
If you are confidence and excellent service for after-sales, then welcome to be our agents or
distributors all over the world.
Q7:What’s your payment?
T/T,D/P,L/C,Western Union., etc
Q8:What’s the delivery?
“TIME IS GOLD” for you and for us, so we have professional team work and production line can
make nice quality in short time.
Service:
1. Pre-Sales Service:We have professional designers to meet the different requirement.
2. After-Sales service:We have an efficient team to meet 24*7 all day service.
3. Full-Service:Actively cooperate with customers to deal with problems in equipment using.
4. Engineers can provide service machinery overseas.
Product Tags:
|
|
Automatic 3 In 1 Feeder Flattening Stamping Equipment CE And ISO Certification Images
|
